Mississippi State University
Mississippi State University Libraries

Need help?

Live chat

Chat Hours

Call or stop by

Reference Desk:
(662) 325-7667

Desk Hours   Location

MSU Faculty Authors

Author

Glenn Steele

Former Interim Vice President for Research and Economic Development, MSU Office of Research and Economic Development

E-mail address: Steele@ME.Msstate.Edu
Website: http://www.research.msstate.edu/personals/steele.php


Bobby Shackouls Professor
William L. Giles Distinguished Professor

Education:
Ph.D. - Mechanical Engineering, North Carolina State University, 1974
M.M.E. - Mechanical Engineering, North Carolina State University, 1970
B.S. - Mechanical Engineering, Mississippi State University, 1968

Professional Registration:
Registered Professional Engineer in Mississippi

Professional Experience:
June 1979 to Present: Bobby Shackouls Professor (2005-Present), William L. Giles Distinguished Professor (1997-Present), Professor (1985-Present), Associate Professor (1980-85), Assistant Professor (1979-80), Department of Mechanical Engineering, Mississippi State University. Areas of teaching and research specialization-thermal sciences and experimental procedures. Research interests-heat transfer, fluid mechanics, experimental techniques, and uncertainty analysis. Sabbatical leave (2002) - verification and validation of CFD codes, Haslar Marine, Ltd., Portsmouth, UK. Administrative duties-Head (1990-08), Department of Mechanical Engineering, Interim Dean of Engineering (1995-96, 2004, 2007-08), Director (2006-Present), Sustainable Energy Research Center, Interim Director (2008-Present), Institute for Clean Energy Technology, Director (2008-Present), Energy Institute, Bagley College of Engineering; Interim Vice President for Research and Economic Development (2009), Mississippi State University.

January 1974 to June 1979: Supervisor (1978-1979), Senior Engineer (1974-1978) Westinghouse Electric Corporation, Bettis Atomic Power Laboratory, West Mifflin, Pennsylvania. Specialized in heat transfer, fluid mechanics, noise, and vibration in nuclear reactor cores and power plant components. Work included analysis, design, and testing of advanced reactor plant concepts; basic research testing in turbulence, noise generation, and flow-induced vibration; and management of the R&D testing facility where above programs were performed. In 1976 served as Staff Engineer to the General Manager (six-month rotating position)--responsible for work assignments and budgets. From 1976-1978 served as technical coordinator of the Noise and Vibration Technology Program at Bettis. From 1978 to 1979 managed the Bettis Thermal and Hydraulics Laboratory.

September 1968 to January 1974: National Defense Education Act Fellow (1971-1972), Oak Ridge Associated Universities Fellow in Nuclear Science and Engineering (1968-1971), Graduate Teaching Assistant (1968-1974), North Carolina State University, Raleigh, North Carolina. Completed Ph.D. with research in area of atmospheric heat transfer in polluted environments including radiative heat transfer effects. Courses taught included thermodynamics and labs on experimental methods for mechanical engineers.

Professional Affiliations:
  • American Society of Mechanical Engineers (Fellow)
  • American Institute of Aeronautics and Astronautics (Associate Fellow)
  • American Society for Engineering Education
  • American Society of Heating, Refrigerating, and Air-Conditioning Engineers
  • Society of Automotive Engineers - Aerospace
  • Tau Beta Pi
  • Pi Tau Sigma
  • Phi Kappa Phi
  • Sigma Xi

  •  

    Experimentation, Validation, and Uncertainty Analysis

    Steele, Glenn
    Publisher: John Wiley & Sons
    Third Edition,2009
    ISBN: 9780470168882
    Collaborators: Hugh W. Coleman

    In this greatly expanded Third Edition, the acclaimed Experimentation, Validation, and Uncertainty Analysis for Engineers guides readers through the concepts of experimental uncertainty analysis and the applications in validating models and simulations, solving problems experimentally, and characterizing the behavior of systems. This Third Edition presents the current, internationally accepted methodology from ISO, ANSI, and ASME standards to cover the planning, design, debugging, and execution phases of experiments. Cases in which the experimental result is determined only once or when the result is determined multiple times in a test are addressed and illustrated with examples from the authors' experience. The important practical cases in which multiple measured variables share correlated errors are discussed in detail, and strategies to take advantage of such effects in calibrations and comparative testing situations are presented. The methodology for determining uncertainty by Monte Carlo analysis is described in detail.

    Knowledge of the material in this Third Edition is a must for those involved in executing or managing experimental programs or validating models, codes, and simulations. Professionals and students in disciplines spanning the full range of engineering and science will find this book an essential guide.



    Mathematics for Mechanical Engineers

    Steele, Glenn
    Publisher: CRC Press
    2000
    Collaborators: W. F. Ames, G. Cain, Y. L. Tong, H. W. Coleman, R. L. Kautz, D. M. Frangopol, and P. Norton

    Mathematics for Mechanical Engineers gives mechanical engineers convenient access to the essential problem solving tools that they use each day. It covers applications employed in many different facets of mechanical engineering, from basic through advanced, to ensure that you will easily find answers you need in this handy guide.For the engineer venturing out of familiar territory, the chapters cover fundamentals like physical constants, derivatives, integrals, Fourier transforms, Bessel functions, and Legendre functions. For the experts, it includes thorough sections on the more advanced topics of partial differential equations, approximation methods, and numerical methods, often used in applications. The guide reviews statistics for analyzing engineering data and making inferences, so professionals can extract useful information even with the presence of randomness and uncertainty. The convenient Mathematics for Mechanical Engineers is an indispensable summary of mathematics processes needed by engineers.



    Experimentation and Uncertainty Analysis for Engineers

    Steele, Glenn
    Publisher: Wiley
    Second Edition,1999
    Collaborators: Hugh W. Coleman

    The dramatic developments in the field of experimental uncertainty analysis over the last ten years have led to sweeping changes in applications, resulting in a new international experimental uncertainty standard. Now, in the only manual available with direct applications to the design and analysis of engineering experiments, respected authors Hugh Coleman and Glenn Steele have thoroughly updated their bestselling title to include the new methodologies being used by the United States and international standards committee groups. Along with several new examples, this latest edition includes new material on: The utilization of Uncertainty Magnification Factors (UMFs) and Uncertainty Percentage Contributions (UPCs) in the planning and early design phases of experiments Refined procedures for accounting for the effects of correlated bias errors Improved methods for accounting for the effects of asymmetric systematic uncertainties The importance of (previously ignored) correlated random errors with an example illustrating how to account for them Uncertainties in comparative testing Uncertainties in the comparison of data and predictions (code validation) Uncertainty analysis by direct Monte Carlo simulation A new method to determine regression uncertainties that properly accounts for both random and systematic uncertainties With a step-by-step approach, engineering students as well as practicing professional engineers who analyze or design experiments will find Experimentation and Uncertainty Analysis for Engineers, Second Edition to be an invaluable reference tool.



    Experimentation and Uncertainty Analysis for Engineers

    Steele, Glenn
    Publisher: Wiley
    First Edition,1989
    Collaborators: Hugh W. Coleman

    How to apply uncertainty analysis to experimentation. Describes how to incorporate uncertainty analysis into the planning, design, construction, debugging, execution, data analysis, & reporting stages of experimental programs. Estimation & propagation of both precision (random) errors & bias (fixed) errors are considered, as are procedures for handling small samples (which require use of the t-distribution), & practical cases in which bias errors in different variables are correlated. Treatment follows (and explains) the ANSI/ASME Standard on Measurement Uncertainty. Chapters 1 through 4 develop methodology for proper consideration of the uncertainty in measured variables & their propagation into the result of an experimantal program. Chapters 5 through 7 present additional considerations in the design of experiments, & illustrate application of the methods given in earlier chapters.




    Solanki, K. N., Erdem Acar, M. Rais-Rohani, M.F. Horstemeyer, W.Glen Steele . "Product Design Optimization with Microstructure-Property Modeling and Associated Uncertainties" International Journal of Design Engineering 2.1 (2009): 47-79.
    Steele, W. Glen and J. A. Schneider. "Undergraduate Laboratory Experiences Using Uncertainty Analysis to Validate Engineering Models with Experimental Data" International Journal of Engineering Education 23.2 (2007): 387-393.
    Mago, Pedro J., Louay Chamra and Glenn Steele. "A Simulation Model for the Performance of a Hybrid Liquid Desiccant System During Cooling and Dehumidification" International Journal of Energy Research 30.1 (2006): 51-66.
    Chamra, L. M., W. Glen Steele and K. Huynh. "The Uncertainty Associated with Thermal Comfort" ASHRAE Transactions 109.2 (2003): 356-365.
    Blandford, Robert S. Steve R. Daniewicz, and W. Glen Steele. "Application of Uncertainty Methodologies to Measured Fatigue Crack Growth Rates and Stress Intensity Factor Ranges Steele" Fatigue and Fracture Mechanics 33 (2003): 445-457.
    Hodge, B. K. and W. Glen Steele. "A Survey of Computational Paradigms in Undergraduate Mechanical Engineering Education" Journal of Engineering Education 91.4 (2002): 415-417.
    Jalalzadeh-Azar, Ali A., W. Glen Steele and B. K. Hodge. "Performance Characteristics of a Commercially Available Gas-Fired Desiccant System" ASHRAE Transactions 106.1 (2000): 95-104.
    Jalalzadeh-Azar, Ali A., B. K. Hodge and W. Glen Steele. "Thermodynamic Assessment of Desiccant Systems with Tergeted and Relaxed Humidity Control Schemes" ASHRAE Transactions 104.2 (1998): 313-319.
    Brown, K. K., Hugh W. Coleman and W. Glen Steele. "A Methodology for Determining Experimental Uncertainties in Regressions" Journal of Fluids Engineering 120.3 (1998): 445-456.
    Adebiyi, G. A., E. C. Nsofor, W. G. Steele, and A. A. Jalalzadeh-Azar. "Parametric Study on the Operating Efficiencies of a Packed Bed for High-Temperature Sensible Heat Storage" Journal of Solar Engery Engineering 120.1 (1998): 2-13.
    Steele, W. Glen, R. A. Ferguson, R. P. Taylor, and H. W. Coleman. "Computer-Assisted Uncertainty Analysis" Computer Applications in Engineering Education 5.3 (1997): 169-179.
    Jalalzadeh-Azar, Ali A., W. Glenn Steele and George A. Adebiyi. "Performance Comparison of High-Temperature Packed Bed Operation with PCM and Sensible-Heat Pellets" International Journal of Energy Research 21.11 (1997): 1039-1052.
    Hosni, M. H., Hugh W. Coleman and W. Glen Steele. "Application of Mathcad Software in Performing Uncertainty Analysis Calculations to Facilitate Laboratory Instruction" Computers in Education Journal 7.4 (1997): 1-9.
    Brown, K. K., H. W. Coleman, W. Glen Steele, and R. P. Taylor. "Evaluation of Correlated Bias Approximations in Experimental Uncertainty Analysis" AIAA Journal 34.5 (1996): 1013-1018.
    Adebiyi, G. A., B. K. Hodge, W. G. Steele, A. Jalalzadeh-Azar, and E. C. Nsofor. " Computer Simulation of a High-Temperature Thermal Energy Storage System Employing Multiple Families of Phase-Change Storage Materials" Journal of Energy Resources Technology 118.2 (1996): 102-111.
    Steele, W. Glen, P. K. Maciejewski, C. A. James, R. P. Taylor, and H. W. Coleman. "Asymmetric Systematic Uncertainties in the Determination of Experimental Uncertainty" AIAA Journal 34.7 (1996): 1458-1463.
    Jalalzadeh-Azar, A. A., W. G. Steele, and G. A. Adebiyi. " Heat Transfer in a High-Temperature Packed Bed Thermal Energy Storage System�Roles of Radiation and Intraparticle Conduction" Journal of Energy Resources Technology 118.1 (1996): 50-57.
    Taylor, Robert P., W. Glen Steele, and Freedie Douglas III. "Uncertainty Analysis of Rocket Motor Thrust Measurements with Correlated Biases" ISA Transactions 34.3 (1995): 253-259.
    Coleman, H. W. and W. Glen Steele. "Engineering Application of Experimental Uncertainty Analysis" AIAA Journal 33.10 (1995): 1888-1896.
    Coleman, Hugh W., W. Glen Steele, and Robert P. Taylor. "Implications of Correlated Bias Uncertainties in Single and Comparative Tests" Journal of Fluids Engineering 117.4 (1995): 552-556.
    Taylor, R. P., R. Luck, B. K. Hodge, and W. Glen Steele. "Uncertainty Analysis of Diffuse-Gray Radiation Enclosure Problems" Journal of Thermophysics and Heat Transfer 9.1 (1995): 63-69.
    Steele, W. Glen, R.A. Ferguson, R.P. Taylor, and H.W. Coleman. "Comparison of ANSI/ASME and ISO Models for Calculation of Uncertainty " ISA Transactions 33.4 (1994): 339-352.
    Steele, W. Glen, R. P. Taylor, R. E. Burrell, and H. W. Coleman. "Use of Previous Experience to Estimate Precision Uncertainty of Small Sample Experiments" AIAA Journal 31.10 (1993): 1891-1896.
    Taylor, R. P., B. K. Hodge, and W. Glen Steele. "Series Piping System Design Program with Uncertainty Analysis" Heating/Piping/Air Conditioning 65.5 (1993): 87-93.
    Hodge, B. K. and W. Glen Steele. "A Century of Evolution in a Mechanical Engineering Curricumlum" Mechanical Engineering News 30.2 (1993): 22-26.
    Chakroun, W., R. P. Taylor, W. Glen Steele, and H. W. Coleman. "Bias Error Reduction Using Ratios to Baseline Experiments : Heat Transfer Case Study" Journal of Thermophysics and Heat Transfer 7.4 (1993): 754-757.
    Steele, W. Glen and C. W. Bouchillon. "Experimental Determination of the Power Requirements for Ultrafine Grinding and Drying of Low-Rank Coals in a Fluid-Energy Mill" Particulate Science and Technology 10.3-4 (1992): 171-182.
    Bouchillon, C. W. and W. Glen Steele. "Electrostatic Separation of Ultrafinely Ground Low-Rank Coals" Particulate Science and Technology 10.1-2 (1992): 73-89.
    Steele, W. Glen and H.W. Coleman. "Integrating Uncertainty Analysis Concepts into Undergraduate Laboratory Course" International Journal of Engineering Education 8.2 (1992): 147-153.
    Hodge, B. K. and W. Glen Steele. "A School District's Engergy Management Program" Heating/Piping/Air Conditioning 61.9 (1988): 109-113.
    Steele, W. Glen and B. K. Hodge. "Using an Energy Index to Assess the Effectiveness and Potential of Energy Management Programs" ASHRAE Transactions 93.2 (1987): 643-652.
    Hodge, B. K., W. Glen Steele, and R. King. "A Simplified Energy Audit Technique for Generic Buildings" ASHRAE Transactions 92.2 (1986): 121-132.
    Hodge, B. Keith, W. Glen Steele, and R. King. "A Simplified Audit Technique for Generic Buildings" ASHRAE Technical Data Bulletin 2 (1986): 86-97.
    Hodge, B. K. and W. Glen Steele. "The Ten Commandments for Energy Conservative Programs" ASHRAE Journal 26.6 (1984): 49-50.
    Hodge, B. K. and W. Glen Steele. "Energy Conservation Opportunities for Schools in Mild Climates" Energy Engineering 79.3 (1982): 16-36.

    Steele, W. Glenn, and H. W. Coleman. "Chapter 19: Experimental Uncertainty Analysis." CRC Handbook of Mechanical Engineering: Second Edition. Eds. Frank Kreith and D. Yogi Goswami. Boca Raton, FL: CRC Press, 2005. 19-113 to 19-128.
    Coleman, H. W., and W. Glenn Steele. "Chapter 39: Uncertainty Analysis." CRC Handbook of Fluid Dynamics. Ed. Richard W. Johnson. Boca Raton, FL: CRC Press, 1998. 39-1 to 39-end.

    Steele, W. Glen and Hugh Coleman. "Quantification of Uncertainty in Computational Mechanics Solutions using Experimental Uncertainty Analysis Concepts." 8th World Congress on Computational Mechanics and 5th European Congress on Computational Methods in Applied Sciences and Engineering, June 30-July 4, 2008, Venice, Italy. 2008. 55.
    Coleman, Hugh and W. Glen Steele. "An Overview of ASME V&V 20: Standard for Verification and Validation in Computational Fluid Dynamics and Heat Transfer." 8th World Congress on Computational Mechanics and 5th European Congress on Computational Methods in Applied Sciences and Engineering, June 30-July 4, 2008, Venice, Italy. 2008. 191.
    Steele, W. Glen. "Current Test Uncertainty Standards." 2007 ASME International Mechanical Engineering Congress and Exposition, November 11-15, 2007, Seattle, Washington. 2007.
    Weathers, J. B., B. T. Marvel, K. K. Srinivasan, Pedro J. Mago, Louay M. Chamra, and W. Glen Steele. "Error Propagation in Heat Release Analysis of Pilot Ignited Natural Gas Combustion." 2007 ASME International Mechanical Engineering Congress and Exposition, Novemeber 11-15, 2007, Seattle, Washington. 2007.
    Xue, Y. A., K. S. Solanki, W. Glen Steele, M. F. Horstemeyer, and J. C. Newman, Jr.. "Reliability of Mechanistic Multistage Fatigue Model for Damage and Life Estimates." 9th AIAA Non-Deterministic Approaches Conference, April 23-26, 2007, Honolulu, Haiwii. 2007.
    Steele, W. Glen and J. A. Schneider. "Experiences in an Undergraduate Laboratory Using Uncertainty Analysis to Validate Engineering Models with Experimental Data." 2005 ASEE Annual Conference and Exposition, June 12-15, 2005, Portland, Oregon. 2005.
    Steele, W. Glen, K. J. Molder, S. T. Hudson, K. V. Vadasy, P. T. Rieder, and T. Giel. "Uncertainty Evaluation of the Computational Model Used to Support the Intergrated Powerhead Demonstrator Project." 53rd JANNAF Propulsion Meeting, December 5-8, 2005, Monterey, California. 2005.
    Steele, W. Glen and J. A. Schneider. "Experiences in an Undergraduate Laboratory Using Uncertainty Analysis to Validate Engineering Models with Experimental Data." 2005 ASEE Southeastern Section Annual Conference, April 3-5, 2005, Chattanooga, Tennessee. 2005.
    Horstemeyer, M. F., K. Solanki and W. Glen Steele. "Uncertainty Methodologies to Characterize a Damage Evolution Model." Plasticity 2005, January 3-8, 2005, Kauai, Haiwii. 2005.
    Steele, W. Glen and R. D. Dieck. "Overview of the 2005 Update of PTC19.1--Test Uncertainty." 2005 ASME International Mechanical Engineering Congress and Exposition, Novemeber 5-11, 2005, Orlando, Florida. 2005.
    Ragsdale, Jim G., Justin R. Jackson, Judy A. Schneider, and W. Glen Steele. "Resolving Experimental Damage by Use of Uncertainty Analysis." Materials Science and Technology Conference, September 26-29, 2004, New Orleans, Louisiana . 2004. 54.
    Steele, W. Glen and J. A. Schneider. "Integrating Model Validation and Uncertainty Analysis into an Undergraduate Engineering Laboratory." 2004 ASME International Mechanical Engineering Congress and Exposition, Novemeber 14-19, 2004, Anaheim, California. 2004.
    Hudson, Susan T., Judy A. Schneider and W. Glen Steele. "Uncertainty Analysis for Undergraduate and Graduate Mississippi State University Mechanical Engineering Students." 41st AIAA Aerospace Sciences Meeting and Exhibit, January 6-9, 2003, Reno, Nevada. 2003.
    Chamra, Louay M., W. Glen Steele, and K. Huynh. "The Uncertainty Associated with Thermal Comfort." ASHRAE 2003 Annual Conference, June 28-July 2, 2003, Kansas City, Missouri. 2003.
    Law, Boon-Chuan, Susan T. Hudson, W. Glen Steele, James Buzzell, and Mark S. Hughes. "Parametric Uncertainty Analysis Study to Provide RBCC Testing Guidelines." 39th AIAA Joint Propulsion Conference, July 20-23, 2003, Huntsville, Alabama. 2003.
    Hudson, Susan T., W. Glen Steele, Harry M. Ryan, Mark S. Hughes, and J. Matt Hammond. "Test Facility Uncertainty Analyses for RBCC Systems Testing ." 38th AIAA Joint Propulsion Conference, July 7-10, 2002, Indianapolis, Indiana. 2002.
    Hodge, B. K. and W. Glen Steele. "Computational Paradigms in Undergraduate Mechanical Engineering Education." 2001 ASEE Southeastern Section Annual Conference, April 1-3, 2001, Charleston, South Carolina. 2001.
    Hodge, B. K. and W. Glen Steele. "Computational Paradigms in Undergraduate Mechanical Engineering Education." 2001 ASEE Annual Conference and Exposition, June 24-27, 2001, Albuquerque, New Mexico. 2001.
    Blandford, Robert S. Steve R. Daniewicz, and W. Glen Steele. "Application of Uncertainty Methodologies to Measured Fatigue Crack Growth Rates and Stress Intensity Factor Ranges." 33rd ASTM National Symposium on Fatigue and Fracture Mechnaics, June 25-29, 2001, Moran, Wyoming. 2001.
    Steele, W. Glen and Hugh W. Coleman. "Modern Applications of Experimental Uncertainty Analysis." ASME Fluids Engineering Division Summer Meeting, May 29-June 1, 2001, New Orleans. 2001.
    Steele, W. Glen, G. N. Wort, P. C. Meecham, G. Bridwell, G. McQuay, and B. Swann. "Measurement Uncertainty Applied to Cost Effective Testing." World Aviation Congress and Exposition, October 10-12, 2000, San Diego, California. 2000.
    Jalalzadeh-Azar, Ali A., W. Glen Steele, and B. Keith Hodge. "Performance Characteristics of a Commercially Available Gas-Fired Desiccant System." 2000 ASHRAE Winter Conference, February 5-9, 2000, Dallas, Texas. 2000.
    Hodge, B. K., W. Glen Steele, and Mary C. Emplaincourt. "Learning Styles Distributions in Mechanical Engineering at Mississippi State University." 1999 ASEE Southeastern Section Annual Conference, April 11-13, 1999, Clemson, South Carolina . 1999.
    Luck, Rogelio, W. Glen Steele, and M. C. Wheeler. "Uncertainty Weighted Corrections of Flows Subject to Continuity Constraints." 45th International Instrumentation Symposium, May 2-6, 1999, Albuquerque, New Mexico. 1999.
    Steele, W. Glen and Hugh W. Coleman. "Recent Developments and Current Status in Experimental Uncertainty Analysis." 1999 ASME International Mechanical Engineering Congress and Exposition, Novemeber 14-19, 1999, Nashville, Tennessee. 1999.
    Jalalzadeh-Azar, Ali A., K. Cook, W. Glen Steele, and B. Keith Hodge. "Experimental Facility for Gas-Fired Desiccant Systems: Capabilities and Performance Analyses." 1998 International Gas Research Conference, November 8-11, 1998, San Diego, California. 1998.
    Stevens, J. W., B. K. Hodge, W. Glen Steele, and Ali A. Jalalzadeh-Azar. "Experience Incorporating Desiccant Dehumidification into an HVAC Course." 1998 ASEE Annual Conference and Exposition, June 28-July 1, 1998, Seattle, Washington. 1998.
    Jalalzadeh-Azar, Ali A., B. Keith Hodge and W. Glen Steele. "Thermodynamic Assessment of Desiccant Systems Targeted and Relaxed Humidity Control Schemes--Alternatives and Case Studies." ASHRAE 1998 Annual Conference, June 20-24, 1998, Toronto, Canada. 1998.
    Steele, W. Glen and Hugh W. Coleman. "Engineering Applications of Uncertainty Analysis." ASME Fluids Engineering Division Summer Meeting, June 22-27, 1997, Vancouer, British Columbia. 1997.
    Hosni, M. H., Hugh W. Coleman, and W. Glen Steele. "Application of Mathcad Software in Performing Uncertainty Analysis Calculations to Facilitate Laboratory Instruction." 1996 ASEE Annual Conference and Exposition, June 23-26, 1996, Washington, D. C.. 1996.
    Jalalzadeh-Azar, Ali A., W. Glen Steele, and B. Keith Hodge. "Design of a Test Facility for Gas-Fired Desiccant Dehumidifiers." International Joint Power Generation Conference and Exposition, October 14-16, 1996, Houston, Texas. 1996.
    Coleman, Hugh W. and W. Glen Steele. "Implementing New Uncertainty Guidelines and Standards in Turbine Testing and Modeling." ASME International Gas Turbine and Aeroengine Congress and Exhibition, June 10-13, 1996, Birmingham, United Kingdom. 1996.
    Brown, K. K., Hugh W. Coleman, and W. Glen Steele. "A Methdology for Determining Experimental Uncertainties in Regressions." 1996 ASME International Mechanical Engineering Congress and Exposition, Novemeber 17-22, 1996, Atlanta, Georgia. 1996.
    Hodge, B. K. and W. Glen Steele. "Career Patterns of Mississippi State ME Graduates." 1996 ASEE Southeastern Section Annual Conference, April 14-16, Gatlinburg, Tennessee. 1996.
    Jalalzadeh-Azar, Ali A., W. Glen Steele, and George A. Adebiyi. "Heat Transfer in a High-Temperature Packed Bed Thermal Energy Storage SystemRoles of Radiation and Intraparticle Conduction." 4th ASME/JSME Thermal Engineering Joint Conference, March 19-24, 1995. 1995.
    Jalalzadeh-Azar, Ali A., W. Glen Steele, and George A. Adebiyi. "Performance Comparison of High Temperature Packed Bed Operation with PCM and Sensible-Heat Pellets." 1995 ASME International Mechanical Engineering Congress and Exposition, Novemeber 12-17, 1995, San Francisco, California. 1995.
    Hodge, B. Keith and W. Glen Steele. "Experiences with a Curriculum with Balanced Design Content in all Stems." 1995 ASEE Southeastern Section Annual Conference, April 9-11, 1995, Biloxi, Mississippi. 1995.
    Hodge, B. Keith and W. Glen Steele. "Experiences with a Curriculum with Balanced Design Content in all Stems ." 1995 ASEE Annual Conference and Exposition, June 23-25, 1995, Anaheim, California. 1995.
    Taylor, Robert P., W. Glen Steele and F. Douglas. "Uncertainty Analysis of Rocket Motor Thrust Measurements with Correlated Biases." 41st International Instrumentation Symposium, April 30-May 4, 1995, Denver, Colorado. 1995.
    Brown, K. K., Hugh W. Coleman and W. Glen Steele. "Estimating Uncertainty Intervals for Linear Regression." AIAA 33rd Aerospace Sciences Meeting and Exhibition, January 9-12, 1995, Reno, Nevada. 1995.
    Steele, W. Glen. "Overview of Revised ANSI/ASME Standard on Measurement Uncertainty--PTC 19.1." International Joint Power Generation Conference and Exposition, October 9-11, 1995, Minneapolis, Minnesota. 1995.
    Steele, W. Glen. "Implications of Correlated Bias Uncertainties in Single and Comparative Tests." 18th AIAA Ground Testing Conference, June 20-23, 1994, Colorado Springs, Colorado. 1994.
    Steele, W. Glen, R. A. Ferguson, Robert P. Taylor, and Hugh Coleman. "Example of Computer-Assisted Uncertainty Analysis." 1994 ASME International Mechanical Engineering Congress and Exposition, Novemeber 6-11, 1994, Chicago, Illinois . 1994.
    Steele, W. Glen, R. A. Ferguson, Robert P. Taylor, and Hugh Coleman. "Comparison of ANSI/ASME and ISO Models for Calculation of Uncertainty." 40th International Instrumentation Symposium, May 1-5, 1994, Baltimore, Maryland. 1994.
    Steele, W. Glen, P. K. Maciejewski, C. A. James, Robert P. Taylor, and Hugh W. Coleman. "Considering Asymmetric Systematic Uncertainties in the Determination of Experimental Uncertainty." 18th AIAA Ground Testing Conference, June 20-23, 1994, Colorado Springs, Colorado. 1994.
    Taylor, Robert P., Rogelio Luck, B. Keith Hodge, and W. Glen Steele. "Uncertainty Analysis of Diffuse-Gray Radiation Enclosure Problems." 32nd AIAA Aerospace Sciences Meeting and Exhibit, January 10-13, 1994, Reno, Nevada. 1994.
    Brown, K. K., Hugh W. Coleman, W. Glen Steele, and Robert P. Taylor. "Evaluation of Correlated Bias Approximations in Experimental Uncertainty Analysis." 32nd AIAA Aerospace Sciences Meeting and Exhibit, January 10-13, 1994, Reno, Nevada. 1994.
    Steele, W. Glen. "Implications of Correlated Bias Uncertainties in Single and Comparative Tests." 1994 ASME International Mechanical Engineering Congress and Exposition, Novemeber 6-11, 1994, Chicago, Illinois . 1994.
    Steele, W. Glen, Robert P. Taylor, and Hugh W. Coleman. "The Determination of Precision Uncertainty for Small Sample Experiments." 39th International Instrumentation Symposium, May 2-6, 1993, Albuquerque, New Mexico. 1993.
    Adebiyi, George A., E. C. Nsofor, W. Glen Steele, and Ali A. Jalalzadeh-Azar. "Parametric Study of the Operating Efficiencies of a Packed Bed for High-Temperature Sensible Heat Storage." ASME Winter Annual Meeting, November 28-December 3, 1993, New Orleans, Louisiana. 1993.
    Chakroun, W., Robert P. Taylor, W. Glen Steele, Hugh W. Coleman. "Bias Error Reduction in Experimental Results by Presentation as a Ratio to a Baseline Experiment--A Heat Transfer Case Study." 31st AIAA Aerospace Sciences Meeting and Exhibit, January 11-14, 1993, Reno, Nevada. 1993.
    Hodge, B. Keith and W. Glen Steele. "A Century of Evolution in a Mechanical Engineering Curriculum." 1993 ASEE Annual Conference and Exposition, June 20-24, 1993, Urbana/Champaign, Illinois . 1993.
    Hodge, B. Keith, Robert P. Taylor, E. W. Jones, and W. Glen Steele. "Experiences with a Video-Taped Off-Campus Mechanical Engineering Graduate Program." 1993 ASEE Southeastern Section Annual Conference, April 4-6, 1993, Nashville, Tennessee. 1993.
    Taylor, Robert P., Rogelio Luck, B. Keith Hodge, and W. Glen Steele. "Uncertainty Analysis of Diffuse-Gray Radiation Enclosure Problems--A Hysersensitive Case Study." Fifth Annual Thermal and Fluids Analysis Workshop, August 16-20, 1993, Cleveland, Ohio. 1993.
    Hodge, B. Keith and W. Glen Steele. "A Century of Evolution in a Mechanical Engineering Curriculum." 1993 ASEE Southeastern Section Annual Conference, April 4-6, 1993, Nashville, Tennessee. 1993.
    Adebiyi, George A., B. Keith Hodge, W. Glen Steele, Ali A. Jalalzadeh-Azar, and E. C. Nsofor. "Computer Simulation of a High Temperature Thermal Energy Storage System Employing Multiple Families of Phase-Change Storage Materials." ASME Winter Annual Meeting, November 8-13, 1992, Anaheim, California. 1992.
    Steele, W. Glen, Robert P. Taylor, R. E. Burrell, and Hugh W. Coleman. "The Use of Data from Previous Experience to Estimate the Precision Uncertainty of Small Sample Experiments." 17th AIAA Ground Testing Conference, July 6-8, 1992, Nashville, Tennessee. 1992.
    Steele, W. Glen and Hugh W. Coleman. "Accounting for Correlated Bias Error Effects in Thermal Sciences Experimentation." ASME/JSME 1991 3rd Thermal Engineering Joint Conference, March 17-22, 1991, Reno, Nevada. 1991.
    Bouchillon, C. W. and W. Glen Steele. "Electrostatic Separation of Ash-Rich Particles in Ultrafinely Ground Low-Rank Coal." 21st Annual Meeting of the Fine Particles Society, August 21-25, 1990, San Diego, California. 1990.
    Bouchillon, C. W., W. Glen Steele, J. D. Burnett. "Power Requirements for Ultrafine Grinding and Drying of Low-Rank Coals in a Fluid-Energy Mill." International Symposium on Advances in Fine Particle Processing, August 22-25, 1989, Boston, Massechusetts. 1989.
    Steele, W. Glen and Hugh W. Coleman. "Using Uncertainty Analysis in Experimentation." ASME Winter Annual Meeting, December 10-15, 1989, San Francisco, California. 1989.
    Steele, W. Glen and Hugh W. Coleman. "Integrating Uncertainty Analysis Concepts into Undergraduate Laboratory Courses." 1989 ASEE Southeastern Section Annual Conference, April 2-4, 1989, Tuscaloosa, Alabama. 1989.
    Coleman, Hugh W., W. Glen Steele, and D. J. Chenevert. "Uncertainty Analysis of Dopant Concentration in a Plume Diagnostics Test Facility." First Annual Conference on Health Monitoring for Space Propulsion Systems, November 14-15, 1989, Cincinnati, Ohio. 1989.
    Bouchillon, C. W. and W. Glen Steele. "Evaluation of Ultrafine Grinding and Drying of Low-Rank Coals in a Fluid Energy Mil." Fifteenth Biennial Low-Rank Fuels Symposium, May 22-25, 1989, St. Paul, Minnesota. 1989.
    Steele, W. Glen and Hugh W. Coleman. "Use of Uncertainty Analysis in the Planning and Design of an Experiment." ASME Winter Annual Meeting, December 13-18, 1987, Boston, Massechusetts. 1987.
    Steele, W. Glen and C. W. Bouchillon. "Combined Ultrafine Grinding and Drying of a Low Rank Coal." Fourteenth Biennial Lignite Symposium on Technology and Utilization of Low-Rank Coals, May 18-21, 1987, Dallas, Texas. 1987.
    Coleman, Hugh W. and W. Glen Steele. "Some Considerations in the Propagation of Bias and Precision Errors into an Experimental Result." ASME Winter Annual Meeting, December 13-18, 1987, Boston, Massechusetts. 1987.
    Steele, W. Glen and B. Keith Hodge. "Using an Energy Index to Assess the Effectiveness and Potential of Energy Management Programs." ASHRAE 1987 Annual Conference, June 28-July 1, 1987, Nashville, Tennessee. 1987.
    Hodge, B. Keith, W. Glen Steele, and R. King. "A Simplified Audit Technique for Generic Buildings." ASHRAE 1986 Annual Conference, June 22-25, 1986, Portland, Oregon. 1986.
    Steele, W. Glen, C. W. Bouchillon, and R. B. Ross. "Benefication Processes for Ultrafinely Ground Low Rank Coals." Thirteenth Biennial Lignite Symposium on Technology and Utilization of Low-Rank Coals, May 21-23, 1985, Bismarck, North Dakota. 1985.
    Hodge, B. Keith and W. Glen Steele. "Energy Engineering in the 21st Century." 1985 ASEE Annual Conference and Exposition, June 16-20, 1985, Atlanta, Georgia . 1985.
    Steele, W. Glen., C. W. Bouchillon, J. A. Clippard, and J. L. Hartness. "Evaluation of the Micropulverization of Mississippi Lignite." Twelfth Biennial Lignite Symposium on Technology and Utilization of Low-Rank Coals, Grand Forks, May 18-19, 1983, Grand Forks, North Dakota. 1983.
    Hodge, B. Keith, W. Glen Steele, and R. D. Walker. "How to Use Generic Building Concepts to Streamline Energy Audits." Sixth World Energy Engineering Congress, November 29-December 2, 1983, Atlanta, Georgia. 1983.
    Bouchillon, C. W., W. Glen Steele, J. A. Clippard, and J. D. Burnett. "Evaluation of the Micropulverization, Drying and Beneficaiton of Lignite." 6th International Coal and Lignite Utilization Exhibition and Conference, November 15-17, 1983, Houston, Texas. 1983.
    Hodge, B. Keith and W. Glen Steele. "The Use of the Energy Utilization Index in Energy Surveys for Generic Buildings." Fifth World Energy Engineering Congress, September 14-17, 1982, Atlanta, Georgia. 1982.
    Sriram, V. and W. Glen Steele. "Temperature Distribution and Nitrous Oxide Formation in the Non-Adiabatic Combustion of Fuel Oil." AIAA/ASME Joint Fluids, Plasma, Thremophysics and Heat Transfer Conference, June 7-11, 1982, St. Louis, Missouri. 1982.
    Arun Kumar, R., R. E. Powe and W. Glen Steele. "Thermal Performance Analysis of an MHD Simulation Test Facility." ASME Winter Annual Meeting, November 16-21, 1980, Chicago, Illinois. 1980.
    Taylor, Robert P., B. Keith Hodge, and W. Glen Steele. "Uncertainty Analysis in Piping Network Analysis and Design--Pump Selection Case Studies." 1993 AIChE Annual Meeting, November 7-12, 1993, St. Louis, Missouri. 0.